2023 Degelman SM70 Base

STRAWMASTER

The Degelman Strawmaster is engineered tough and designed to tackle enormous straw problems. Available in 5 row; 26” x 5/8” tines  or 7 row; 26" x 1/2" tines equipped with tungsten carbide Endura-Tip tines, and set in large ten foot wide sections, this machine is at the forefront of modern straw management. The Strawmaster series of heavy harrows will shatter straw, control weeds, rake flax straw, and incorporate seed and chemicals.

The patented spring bar technology is at the heart of every Strawmaster. The simple torsional spring bar design is unlike other heavy harrows. Strawmaster uses a spring bar system that lets you apply downward pressure to the harrow sections as you need it. These twin spring bars allow in-cab hydraulic control by applying pressure from zero to 1900 pounds per harrow section. If you don’t need pressure, just put it in float.

Easy, Drop-Out Tine Replacement

The tine bars easliy drop out by removing a few bolts making the replacement faster and easier.

Fast, Simple Adjustments

From the bottom up, Strawmaster was designed to hold and shatter straw, follow contour, rake flax residue, seed, control weeds, pack and spread residue evenly. To do this effectively, proper frame and tine angle adjustment is always important. When you’re harrowing a variety of crops under different field conditions, fast and easy adjustment is critical.

Ground Contouring

Under float or under pressure, the harrow sections are designed for flexibility. The torsion spring bars are positioned along the sides of the harrow frame providing an even distribution of pressure to the frame. The bars can then flex in response to counter pressure from the land contours with each section rising over hills and falling into hollows.

Breaking and Spreading Straw

The primary purpose of the Strawmaster is to breakup and spread most types of straw residue efficiently. High frequency vibration provides the shattering action for perfect residue control. For most farming practices, speeds of up to 12 mph can be attained.

Raking

The Strawmaster is quickly becoming the most popular
machine for raking flax straw. It can maximize holding
capacity by applying pressure through the spring bar
control.

7 rows offers 68% More Ground Engagement     

The Strawmaster 7 row gives you approximately 68% more ground coverage in the field. It’s combination of ground engagement and tine vibration can manage your crop residue without disturbing too much soil and losing moisture in the fall. In the spring you can break up lumps and clods and loosen the soil, which leaves a superior field finish and seedbed for the for seeding or planting.

Traditionally, more tines mean more wear parts. Every Strawmaster 7 comes equipped with standard carbide Endura-Tip tines. Which in addition to providing 4x the life of a standard harrow tine, actually which helps bust and move more straw.

The Degelman Strawmaster 7 High Performance Field Conditioner features 7 rows of ½” x 26” tines with 1-7/16” spacing built on frame heavy enough to handle the toughest conditions. This means more time in the field and less time in the shop.