2025 Brillion 850XT-53′

THE LATEST LANDOLL ADDITION
Staying true to what Landoll does, bringing maximum flexibility to our low deck height detachable series. The engineered extension beams create 4 different positions.

LOW RIDE WITH 6″ GROUND CLEARANCE
The 850XT shares features from the current Landoll 800 series and provides loadable low deck height all the way to the rear bumper. Having ride height adjustments in the gooseneck and rear trunnion, provides much needed compliance on the job site. Staying with the industry’s easiest gooseneck attachment, getting those challenging loads doesn’t seem challenging anymore.

QUICK LOAD & UNLOAD OF LARGE EQUIPMENT
Featuring the industry’s best load angles and frame clearances, the 850XT is up for the challenge. Engineered meticulously for low ground clearance loads, like buses, RV coaches, firetrucks, and more. Landoll is here to help you get the job done while others simply do not have the right tool for the job

Features May Include

• Capacity*    50 Ton (100,000 lbs.) (Capacity Reduces During Extending)
• Deck Rating    100,000 lbs. in 16′
• Estimated Base Weight    53′ – 24,000 lbs.(+/-3%)
• Main Frame    Fabricated Box Beam, 100,000 Yield PSI Flange
• Crossmembers    6″ High Tensile I-Beams on 21″ Centers
• Gooseneck    12″ Outriggers for 24′ Main Deck
• Pin Setting    15″ Pin Setting
• Swing Clearance    84″ Swing Clearance
• Hitch    2″ Hitch Receiver with Electrical Outlet for Accessory Lights
• Deck Width    102″
• Loaded Deck Height    22″
• Loaded Ground Clearance    6″
• Decking    42″ Deck Behind Rear Axle With Loading Angle and Boom Through
• Accessories    Arctic Components
• Storage Area    1 – Located Rear of Lower Deck; 1 – Located Behind Rear Axle; Easy Access Side Door Storage in Bolsters; Chain and Block Box at Rear of Main Deck Between Main Beams
• Tie Downs    Perimeter Outer Flange Keyhole Gotchas; Center Main Deck Keyhole Tiedowns – 21″ Centers; (33) Total – Angled and Flush Mounted D-Rings; Neck: D-Rings 2 Each on Main Frame Rear Flush Mounted; Trunnion: D-Rings 2 Each Flush Mounted Front and Rear on Top of
• Inner Beams, 1 Each Angled on Bolsters Between Axles; Lower Deck: Web Mounted on 42″ Centers
• Bolsters    Quarter Front Bolster with Quick-Lift Drive Over Ramp; Weight Bearing Bolsters Between Axles with Storage
• * Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.
• Suspension    DEXTER Air Ride Suspension with 25,000 lbs Capacity Axles
• Grease    Centralized Grease System
• Axles    3 – 25,000 lbs. Dual Tire, Oil Bath Bearings; 60″ Axle Spacing, Automatic Slack Adjusters – All Axles, Drum Brakes
• Brakes    12.25 x 7.5 Full Air with Spring Brakes ABS, 4S2M
• Height Adjustment    Air Raise and Lowering Valve with Quick Dump
• Tires    235/75R17.5 Continental
• Rims    17.5 x 6.75 Tubeless
• Hydraulic Hook Up    Quick Couplers 2500 PSI/20 GPM @ Controls; 50 GPM Max
• Lights    Grote Clear Lens LED With Shock Absorbing Surround (10-year warranty)
• Wiring Harness    Grote “Xtreme” Wiring Harness (7-year warranty)
• Outlet    7 Prong Blade Electric Outlet at Rear for Accessory Lighting
• Strobing Light Package in Bumper
• Finish    400 Degree Bake/Steel Grit Shot Blast to Bright Metal
• Primer    Zinc Rich Powder Primer
• Powder Coat    TGIC Polyester Powder Coat White, Black, Yellow, Blue, Red, Green,
• Sapphire Blue, Dark Gray